KD100 Series 220V Single Phase Frequency Inverter AC Motor Drive
0.4KW-15KW three phase to single phase inverter
KD100 Vector Variable Frequency Inverter AC Drive
10HP vfd ac 220v single phase input 3 phase output frequency
inverter
KD100 Series 220V Single Phase Frequency Inverter AC Motor Drive
0.4KW-15KW three phase to single phase inverter
K-EASY KD100 features and technical data
1, With inside EMC C3 filter and building-block design for IO
extension card and different kinds of PG card
2, Top performance in our industry which represent in torque in
less than 1hz 0.5hz 0.25hz 0.1hz and 0hz
it can compare with any domestic chinese brand for output torque.
3, Smooth running and stability, support optional LCD keypad and
dual display keypad. support PC tools.
4, Support modbus485, canopen, profinet communciation.
5, Low noise on motor and fast response for 0.1S acceleration and
deceleration without dead zone
6, Reverse and forward free switching
7, Sleeping function and energy saving function as well as in built
PLC programming
8, Tension control and torque mode control
9, Support two group motor parameters which can realize two motor
switching control
Advantages
Thanks to sophisticated engineers, scientific producing
workmanship, rigorous quality control systems and management team,
K-Drive frequency inverters are equipped with advanced features,
some of which are listed as below:
01. Starting torque: 180% at 0.5Hz (V/f pattern, SVC pattern);
02. Speed adjustable range: 1: 100 (V/f pattern, SVC pattern);
03. Speed accuracy: +/-0.5% (V/f pattern), +/-0.2% (SVC pattern);
04. Over load capability: 150% 1minute, 180% 10seconds;
05. Abundant frequency command sources;
06. Diverse input and output terminals;
07. Ambient temperature: -10°C~50°C;
08. High precise torque constraint, process PID control, multi-speed
control, contracting brake control, field weakening control, all
sides protection, etc;
09. Online and offline auto-tuning of motor parameters can both
performed;
10. Extremely short-time acceleration can be performed without any
trip, such as 0.1s or 0s from 0Hz to 50Hz;
| Mains Supply (L1/L,L2,L3/N) | |
|---|
| Supply voltage | 208-240V±10% 380-480V±10% |
|---|
| Power source frequency | 50/60Hz±5% |
|---|
| Displacement power factor (cos φ) | (> 0.98) |
|---|
| Output Data (U, V, W) | |
|---|
| Output voltage / frequency | 0-100% of supply voltage / 0.00-600.00 Hz or customized |
|---|
| Ramp time | 0.01-60000 S |
|---|
Note:150% current can be provided for 1 minute, 180% for 10 seconds.
Higher overload rating is achieved by oversizing the drive.
| Digital Input | |
|---|
| Programmable digital inputs | 5 |
|---|
| Logic | NPN or PNP |
|---|
| Voltage level | 22 - 26V |
|---|
| Analog Input | |
|---|
| Analog inputs | 2 |
|---|
| Modes | Voltage or current |
|---|
| Level | 0 to +10V, 0/4 to 20 mA (scalable) |
|---|
| Automatic correction | YES |
|---|
| Relay Output |
|---|
| Programmable relay outputs | 1 |
|---|
| RA - RB / TA - TB | Normally close |
|---|
| RA - RC / TA - TC | Normally open |
|---|
| Contact capacitance | 250VAC/3A, 30VDC/3A |
|---|
| Terminal 485 Interface |
|---|
| 485+ / 485- | Rate: 4800/9600/19200/38400/57600/115200 bps Max. distance: 500m |
|---|
| GND | Isolated from COM |
|---|
| Ambient | |
|---|
| Vibration | Less than 5.9 m/s² (0.6g) |
|---|
| Humidity | Relative humidity 5% - 95 %. No condensation |
|---|
| Corrosive environment | 3C3 |
|---|
| Ambient temperature | -10 ºC - 50 ºC |
|---|
| Altitude | 0 - 2,000 m |
|---|
| Rated output current derated 1% every 100 m above 1,000 m |
|---|
| Storage temperature | -40 - +70 ºC |
|---|
| Efficiency | Efficiency At rated amps: ≥93% |
|---|
| IP grade | IP20 |
|---|
| Cooling method | Forced air cooling |
|---|
| Fieldbus Communication |
|---|
| Modbus RTU, Modbus ASCII | Built-in |
|---|
Applications
KD100 drives are economical series at K-Drive. They offer V/f
control, including voltage and frequency separated control,
adaptable to various industrial applications if sensor-less vector
control is not required, including printing machines, packaging
machines, pumps, fans and blowers, etc.
 |  |  |
| Conveyors | Centrifuges | Food processing Machinery |
 |  |  |
| Pumps | Fans | More … |
Why choose K-Drive variable frequency drive?
In the trend of advocating smart and simple industrial automation,
environmentally friendly products, value-added solutions, K-Drive,
as one of the world's leading drive manufacturers aggressively
investing in R&D, production, and continuous quality
improvement, is well positioned to provide its customers with
technology-driven, performance-outstanding products such as VFDs,
wind power converters, servo drives, HEV/EV drives, helping its
customers save energy and increase industrial productivity with
sustainability on the one hand, and enhancing their entire
value-chain quality, delivery, and services on the other hand.
