KD600E Series Vector Elevator Frequency Inverter , AC Motor Drive
7.5KW 11KW
KD600E series frequency inverter is based on the DSP control system,
adopts current vector control technology, and cooperates with
multiple protection methods. It can be applied to asynchronous
motors and provide excellent driving performance. The product has greatly improved customer ease of use and
environmental adaptability in terms of air duct design, hardware
configuration, and software functions. The key components are all
international brands such as Tl, ON, INFINEON, etc., which provides
a strong guarantee for customers' rest assured use.
Products Shows
LED AND LCR Keypad
Products Vedio Show:
Over voltage suppression
The overvoltage suppression function could prevent inverter from
overvoltage fault in ACC/DEC process. During ACC/DEC, if the bus
voltage of inverter reaches or exceeds the overvoltage protection
point, the overvoltage suppression function could suppress the
rising of bus voltage by automatically adjust the operation
frequency, so as to protect the devices and avoid the overvoltage
fault caused by the rising of bus voltage.
Single multi-speed terminal elevator controller
For the elevator controller with only one multi-segment speed
changing terminal, the high-speed segment and the layer speed
segment are controlled by the on-off of the high-speed terminal.
The wiring diagram of such elevator controller and frequency
converter is as follows:
Single multi-speed terminal elevator controller
For the elevator controller with only one multi-segment speed
changing terminal, the high-speed segment and the layer speed
segment are controlled by the on-off of the high-speed terminal.
The wiring diagram of such elevator controller and frequency
converter is as follows:
Double multi-speed terminal elevator controller
When the elevator is in use, if the system's power supply suddenly
fails, it may result in passengers being locked in the car.
KD600E series elevator inverter can support the emergency UPS power
supply operation for emergency power outage operati-on, and the
emergency signal can be received by the inverter terminal DI6. The
wiring diagram is as follows:
Closed loop elevator control
KD600E series elevator inverter can support closed-loop control,
and provides a variety of PG cards for use with different encoders.
Please refer to Chapter 5 of KD600 series User manual for PG card
information. The wiring diagram of elevat-or controller and
frequency converter for closed-loop elevator control is shown in
the following figure:
Applications
The KD600E driver is a special frequency converter for K-Drive
elevators. They provide V/f control, including voltage and
frequency separation control.
Why choose K-Drive variable frequency drive?
In the trend of advocating smart and simple industrial automation,
environmentally friendly products, value-added solutions, K-Drive,
as one of the world's leading drive manufacturers aggressively
investing in R&D, production, and continuous quality
improvement, is well positioned to provide its customers with
technology-driven, performance-outstanding products such as VFDs,
wind power converters, servo drives, HEV/EV drives, helping its
customers save energy and increase industrial productivity with
sustainability on the one hand, and enhancing their entire
value-chain quality, delivery, and services on the other hand.
Production
In production, rigorous quality control is implemented on
components, circuit boards, and the finished goods, assuring
products without defects.
K-Drive VS Other brands
| Performance | Common brands | K-Drive |
|---|
| Applicable motors | Asynchronous motors | Asynchronous /synchronous motors |
| Starting torque | 2.0Hz, 150% (sensor-less vector control) 0Hz, 180% (closed-loop
vector control) | 0.5Hz, 180% (sensor-less vector control) 0Hz, 200% (closed-loop
vector control) |
| Speed adjustable range | 1:100 (SVC), 1:1000 (VC) | 1:200 (SVC), 1:1000 (VC) |
| Ambient temperature (no derating required) | -10-40ºC | -10-50ºC (for most of the models) |
| Rated input voltage | 208VAC-400VAC | 208VAC-480VAC |
| Communication | Modbus RTU//ASCII | Modbus RTU//ASCII Profibus-DP, CANopen, etc. |
| Position control (fixed length, or angular positioning) | × | √ |
| Field weakening control | × | √ |
| Autotune online | Online | Online & Offline |
| Short-time ramp-up | Trip | No trip |
| Customized features (software and/or hardware) | Unprocurable or no experience | Procurable with rich experience |
Packaging and logistics
All drives are well packed before shipment, fit for air shipment,
sea transportation, and express delivery. Customers are able to
call its own nominated forwarder or consult K-Drive logistics
department for worldwide shipment services.
* Low-power inverters are packed in cardboard box, and others are
in plywood cases.
* Plenty of transportation procurable globally in accordance with
customer demand or K-Drive expertise.
K-Drive AC motor drives are able to replace AC drives and inverters
of the following brands: , LS, Toshiba, Siemens, Lenze, Yaskawa,
Mitsubishi, Delta, Hitachi, WEG and etc；
Please leave us an inquiry for more details of our frequency
inverters, like information of the model numbers, technical data,
applicable application, pricing, distributor policy, lead time
and/or customized functionality.
